Adjustment of blow molding machine manipulator

Adjustment of blow molding machine manipulator

　　 At present, some operations of many production equipment have replaced manual operations. In industrial production, especially when bottles are produced, they often go through the blowing step. At this time, the help of the bottle blowing machine is needed. It is often used for blowing according to different bottles. The manipulator of the equipment can be adjusted to the next step. How should the user adjust its manipulator?

　　 1. The air pressure of the bottle blowing machine must be turned off and the position must be adjusted manually to avoid damage to the friction mold and manipulator;

　　2. Adjustment mode, that is, you can turn on the air pressure, and then manually run it once after inhaling or clamping. The time can be adjusted later, and then the fully automatic function can be turned on after the inspection. Check whether the alarm sensor is valid, and then proceed to production.

　　3. During the installation and debugging process of the blowing machine manipulator, the speed may be reduced. As long as the speed is adjusted, the production is different. Need equipment manipulator to cooperate with debugging. Most of the speed of the manipulator is controlled by air pressure.

　　 When we use the blow molding machine, the inevitable operation is adjustment. It is often used for bottle processing. Only when the manipulator is adjusted properly can the overall efficiency of the equipment be improved. A very important part of bottle production is to blow up the finished preform, which has become a bottle that we often see in daily life.